Location: Melbourne
When I try to edit a railcam photo I get this...because you're not allowed. Like it says.
RP 3.9 Bugs and Feedback
michaelgreenhill
Administrator That's Numberwang!
Location: Melbourne
railblogger
Chief Commissioner
Location: At the back of the train, quitely doing exactly what you'd expect.
I'm not seeing much on the home page - only the title, menu bar, and backgrounds. CTRL+F5 doesn't work. Home page displayed properly yesterday.
michaelgreenhill
Administrator That's Numberwang!
Location: Melbourne
I'm not seeing much on the home page - only the title, menu bar, and backgrounds. CTRL+F5 doesn't work. Home page displayed properly yesterday.Fixed.
freightgate
Minister for Railways
Location: Albury, New South Wales
I really am struggling with the new railcams format.
On a mobile device I select the railcams and the screen is similar to what is was.
On the old system selecting the latest would iirc give you the last 10 images ?
Now I get a single image with a big fat image with previous underneath.
On a mobile device I select the railcams and the screen is similar to what is was.
On the old system selecting the latest would iirc give you the last 10 images ?
Now I get a single image with a big fat image with previous underneath.
railblogger
Chief Commissioner
Location: At the back of the train, quitely doing exactly what you'd expect.
Twitter-like mentions do not work if the username has spaces.
michaelgreenhill
Administrator That's Numberwang!
Location: Melbourne
I really am struggling with the new railcams format.Have you looked at the "Recent" menu entry?
On a mobile device I select the railcams and the screen is similar to what is was.
On the old system selecting the latest would iirc give you the last 10 images ?
Now I get a single image with a big fat image with previous underneath.
Valvegear
Oliver Bullied, CME
Location: Richmond Vic
Repeat of earlier post
"I can log on at my own PC at home, where I have a "remember me" flagged. I can then access various forums etc.
When I try logging on from another PC, the name "Valvegear" appears in the left hand green panel, but I can't go anywhere else.
Any ideas? "
I tried the suggestion of refreshing the page and it did not work.
"I can log on at my own PC at home, where I have a "remember me" flagged. I can then access various forums etc.
When I try logging on from another PC, the name "Valvegear" appears in the left hand green panel, but I can't go anywhere else.
Any ideas? "
I tried the suggestion of refreshing the page and it did not work.
awsgc24
Minister for Railways
Location: Sydney
The following is an unwanted duplicate thread.
How it came to be duplicated is unknown.
See: https://www.railpage.com.au/f-t11380393.htm
When I tried to delete it RP said "Cannot delete thread already replied to".
But the problem thread HAD NOT been replied to at that time.
I have tried and failed to report this problem thread to Admin, but failed.
For your action.
How it came to be duplicated is unknown.
See: https://www.railpage.com.au/f-t11380393.htm
When I tried to delete it RP said "Cannot delete thread already replied to".
But the problem thread HAD NOT been replied to at that time.
I have tried and failed to report this problem thread to Admin, but failed.
For your action.
s3_gunzel
Not a gunzel developer
Location: Western Sydney, AU
Was doing some fossiking for something and came across this: https://www.railpage.com.au/f-p1685242.htm
donttellmywife
Chief Commissioner
Location: Antofagasta
Please post your thoughts and bugfixes belowFirefox 34.0.5. Using the Reply button on a specific post [, and then perhaps deleting some text from that post], typing a response and then hitting submit often (but not always) results in a complaint about a phantom post not existing.
hitting back, then the "View source" button in the text editor widget and then resubmitting then works.
railblogger
Chief Commissioner
Location: At the back of the train, quitely doing exactly what you'd expect.
Tried to add an item to the glossary but can't see it. Does it have to be approved?
N463
Locomotive Driver
Sometimes going to the last page of a thread gives the error "We could not find the forum posts you requested for topic ID xxxxxxxx"
Seems to be a problem when a topic has just reached a new page.
Not specifically a RP 3.9 bug (the problem existed before the upgrade)
Seems to be a problem when a topic has just reached a new page.
Not specifically a RP 3.9 bug (the problem existed before the upgrade)
michaelgreenhill
Administrator That's Numberwang!
Location: Melbourne
Tried to add an item to the glossary but can't see it. Does it have to be approved?Yes, it does
8077
Chief Train Controller
Location: Crossing the Rubicon
Yes, it does
Just added some new content.
Want to report an issue. I can no longer click on am image in railcams https://www.railpage.com.au/railcams/gheringhaploop3/photo/16083469949 and have the photo display larger to read loco numbers.
railblogger
Chief Commissioner
Location: At the back of the train, quitely doing exactly what you'd expect.
Yes, it doesIf that's the case, then perhaps some way of informing the user might be worthwhile?
8077
Chief Train Controller
Location: Crossing the Rubicon
This is a useful inclusion to the Railcams section.
https://www.railpage.com.au/railcams?mode=photos.tagged
The only change I would make is to have a link like https://www.railpage.com.au/railcams/stawellhd actually send the user to the photo rather the camera. Not sure if this is possible at all?
https://www.railpage.com.au/railcams?mode=photos.tagged
The only change I would make is to have a link like https://www.railpage.com.au/railcams/stawellhd actually send the user to the photo rather the camera. Not sure if this is possible at all?
wurx
Lithgovian Ambassador-at-Large
Location: The mystical lost principality of Daptovia
Should be fixed now.'tis! And thanks
railblogger
Chief Commissioner
Location: At the back of the train, quitely doing exactly what you'd expect.
Routes module - route maps and photos don't load - loading symbol shows indefinitely.
bevans
Site Admin
Location: Melbourne, Australia
Attempting to add a new idea and the application states the title is too long. Cut it back to 20 characters of less and still does not post. Please check error logs and confirm.
X'Trapolis-904M
Deputy Commissioner
Location: Melbourne
Attempting to add a new idea and the application states the title is too long. Cut it back to 20 characters of less and still does not post. Please check error logs and confirm.Brian, he was talking about the routes not the ideas
Bethungra
Train Controller
I am a railcam maintainer having managed the empty photos for stawell and gheirnghap for a while. I now try and delete a false picture and get the error:
You are not allowed to access this part of Railpage.
[color=#0066cc]Click here to try again.[/color]
You are not allowed to access this part of Railpage.
[color=#0066cc]Click here to try again.[/color]
X'Trapolis-904M
Deputy Commissioner
Location: Melbourne
I am a railcam maintainer having managed the empty photos for stawell and gheirnghap for a while. I now try and delete a false picture and get the error:Happened to me too @bevans fix this
You are not allowed to access this part of Railpage.
[color=#0066cc]Click here to try again.[/color]
if you are cutting back just PM them or promote me to forum mod
s3_gunzel
Not a gunzel developer
Location: Western Sydney, AU
promote me to forum modPlease don't do that...
Raichase
Captain Rant!
Location: Sydney, NSW
Happened to me too @bevans fix thisI'm going to risk earning the ire of the management team with this post, but it needs to be said.
if you are cutting back just PM them or promote me to forum mod
Firstly, who the heck do you think you are making demands of Brian or any of the other administrators. You use this site and continue to do so thanks to their generous donation of time, money and computer equipment. Without Brian, Michael and the other administrators, this site would be long gone, replaced with Facebook groups full of woeful photos and bickering dribblers. Pull your head in.
Secondly, the day you become a forum moderator is the day I leave Railpage for good. Time and time again you've made completely unsubstantiated statements, garbage posts, and other nonsense. You're barely a useful user, so you're not fit to be a moderator.
Perhaps try stop posting once in a while and actually read how the moderators and long term users post. With full sentences, correct grammar and cohesive ideas. I, and I have little doubt, other members are getting sick of your garbage.
s3_gunzel
Not a gunzel developer
Location: Western Sydney, AU
I'm going to risk earning the ire of the management team with this post, but it needs to be said.+1
Firstly, who the heck do you think you are making demands of Brian or any of the other administrators. You use this site and continue to do so thanks to their generous donation of time, money and computer equipment. Without Brian, Michael and the other administrators, this site would be long gone, replaced with Facebook groups full of woeful photos and bickering dribblers. Pull your head in.
Secondly, the day you become a forum moderator is the day I leave Railpage for good. Time and time again you've made completely unsubstantiated statements, garbage posts, and other nonsense. You're barely a useful user, so you're not fit to be a moderator.
Perhaps try stop posting once in a while and actually read how the moderators and long term users post. With full sentences, correct grammar and cohesive ideas. I, and I have little doubt, other members are getting sick of your garbage.
As an aside, nice new rank @Raichase!
Subscribers: 8077, awsgc24, bevans, DounutCereal, Greensleeves, JoppaJunction, michaelgreenhill, N463, NSWGR8022, Pressman, Raichase, seb2351, TomBTR, Transtopic, wurx, X'Trapolis-904M
Quick Reply
We've disabled Quick Reply for this thread as it was last updated more than six months ago.