Victorian Vline and ARTC Scanner Feed

 
  bevans Site Admin

Location: Melbourne, Australia
It's only scanning the train to base radio network so it'll be quite most of the time. V/Line is moving to ICE radios so locos with ICE radios won't be heard on this scanner. Where are you located for this to receive all of the TTB radios? Somewhere in Melbourne I assume? Just saw it said Kensington on the other page. If you programmed channel 1's frequency into the radio you'd get a fair amount of traffic on it. From conductor's to drivers, drivers to signal boxes and Centrol (West tower for the RRL), METROL to non suburban trains etc.
vlocity160

Can you please confirm the frequencies for channel 1?

Sponsored advertisement

  vlocity160 V/Gunzel

V1 LTR NEW (CH1) is 450.0500 if I recall correctly
  JoppaJunction Chief Train Controller

Location: Banned
V1 LTR NEW (CH1) is 450.0500 if I recall correctly
vlocity160

What would one hear on this channel please?
  vlocity160 V/Gunzel

What would one hear on this channel please?

JoppaJunction
It's only scanning the train to base radio network so it'll be quite most of the time. V/Line is moving to ICE radios so locos with ICE radios won't be heard on this scanner. Where are you located for this to receive all of the TTB radios? Somewhere in Melbourne I assume? Just saw it said Kensington on the other page. If you programmed channel 1's frequency into the radio you'd get a fair amount of traffic on it. From conductor's to drivers, drivers to signal boxes and Centrol (West tower for the RRL), METROL to non suburban trains etc.
vlocity160
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
Scanning ch1 on my uniden now.

Update: it seems when i was cleaning it i got a 502 error (CMOS Error)

and nothing fixed it so it seems i might need to get a new fan and hdd for it but the feed will be online until it is replaced.

And @vlocity160 i will program all freqs today so it might get a bit busier.

the freqs that i got were off @railscan so they are outdated.

Plus there is a mouse on the loose here causing me to delay any work.
  bevans Site Admin

Location: Melbourne, Australia
I have entered the 450.0500 into my scanner this very morning.  I will leave it on for the day and see what eventuates.  Nothing heard as yet.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
I have entered the 450.0500 into my scanner this very morning.  I will leave it on for the day and see what eventuates.  Nothing heard as yet.
bevans
I Did that too nothing it is actually the NSW channel so nothing
  x31 Chief Commissioner

Location: gallifrey
V1 LTR NEW (CH1) is 450.0500 if I recall correctly
vlocity160

Can you please check this information.  See the posts about this channel. Nothing happening could it be NSW?
  ab123 Chief Train Controller
  x31 Chief Commissioner

Location: gallifrey
http://vicsig.net/index.php?page=infrastructure&section=train%20radio
ab123

I believe these are not of date. @vicsig can you please confirm?
  bevans Site Admin

Location: Melbourne, Australia
My scanner was tuned to 450.0500 all weekend.  Did not hear a single broadcast of anything.

@Michelle12 I am aware you have frequencies for your scanner.  Can you please list.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
Update: The fan seems to be gone.
Until i can make some arrangement so it can be stopped and airflow can still go thro.

I will open the feed only in the hours of 4:30-9:00pm Sunday to Thursday
4:00pm-12:00am Friday/Saturday


This is to minimise the impact on the laptop melting/catching on fire.

@x31 All the 469 channels are live the 450 one is NSW only and will not work here.

X'Trapolis-904M/Tramscan
  x31 Chief Commissioner

Location: gallifrey
Update: The fan seems to be gone.
Until i can make some arrangement so it can be stopped and airflow can still go thro.

I will open the feed only in the hours of 4:30-9:00pm Sunday to Thursday
4:00pm-12:00am Friday/Saturday


This is to minimise the impact on the laptop melting/catching on fire.

@x31 All the 469 channels are live the 450 one is NSW only and will not work here.

X'Trapolis-904M/Tramscan
X'Trapolis-904M

I will try and connect this evening using the media file for download at Railpage.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
I will try and connect this evening using the media file for download at Railpage.
x31
Might not be up until 6pm, laptop been a bit defiant.
  JoppaJunction Chief Train Controller

Location: Banned
Might not be up until 6pm, laptop been a bit defiant.
X'Trapolis-904M

Feed saying it is offline.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
Feed saying it is offline.
JoppaJunction
Online now. looks like i might have to add 418.200 Making this a ARTC Feed too!
  JoppaJunction Chief Train Controller

Location: Banned
Online now. looks like i might have to add 418.200 Making this a ARTC Feed too!
X'Trapolis-904M

Did you do this?
  freightgate Minister for Railways

Location: Albury, New South Wales
Feed was off line last night.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
Feed was off line last night.
freightgate
It was on till 9pm
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
@bevans Can you confirm the train tx for 418.175? nothing on 409-411 on my scanner.


To all other members when i get the audio cable we will start on a full setup with all channels.
  vlocity160 V/Gunzel

V1 LTR NEW (CH1) is 450.0500. It's not like TTB radio with repeaters on it and base stations. It's a local channel from one end of a train to another or to a signal box etc. It depends on how far away you are as to whether you'll be able to receive the transmission or not. It is the current channel 1 LTR as I heard Seymour panel state to train 8330 that it had arrived complete at Seymour this arvo.
  freightgate Minister for Railways

Location: Albury, New South Wales
Could Railpage install a scanner in at bunbury street ?

That would hear quite a lot of conversation around the Melbourne terminals.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
Could Railpage install a scanner in at bunbury street ?

That would hear quite a lot of conversation around the Melbourne terminals.
freightgate
I am in Kensington and bun cam is only about 2km's away so there is no need.

@vlocity160 Thanks for that! will add it in to the scanner now.


Update: we hope to cut the RTL-SDR Setup off next work and go to a scanner setup so we don't use too much of the laptop's power.
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
Looks like 2.4GHZ Has gone on me.

Feed Offline due to a internet fault.
  freightgate Minister for Railways

Location: Albury, New South Wales
Why is power a problem ?

When will the feed be back online ?

Sponsored advertisement

Display from:   

Quick Reply

We've disabled Quick Reply for this thread as it was last updated more than six months ago.