WANTED! - Models/items you want to look for

 
  Flatop Deputy Commissioner

Location: Some where in a Cab
Anyone have a spare Auscision u van Blue Sunshine Biscuits VFW 46 FOR SALE.

Sponsored advertisement

  jamie63 Beginner

I am chasing an old Bachman pancake motor . The type used in steam locos. Preferably working, however any condition would help
Thanks
  G Train Locomotive Driver

Does anyone have an old Hanovale NHBF ballast hopper kit unassembled or assembled surplus to their requirements by any chance?
Please PM me if you do.
Cheers,
  Shazam75 Chief Commissioner

Wanted: 21 pin decoder:
Looking for anemodels 21 pin LC203 or LC205 Lococruiser Decoder.
Please PM me.

Thanks
Shelton
  SziaOda00 Beginner

WANTED!
WD MODELS WAGON KITS

Willing to pay up to 35 AUD.
  Speedbird Train Controller

Hi WTB

AUSTRAINS NEO Overland NR class, Austrains NR54 and Trainorama S303 in VR livery  please.

I am located Endeavour Hills Victoria
  jmcdon Beginner

WANTED
600/700 railcar set.

Cheers,
  andyfmx Locomotive Fireman

Wanted:

Steam Era Models E wagon kit, or the chassis/underfloor from the kit.

Please PM.
  TheMeddlingMonk Deputy Commissioner

Location: The Time Vortex near Melbourne, Australia
Wanted:

Steam Era Models E wagon kit, or the chassis/underfloor from the kit.

Please PM.
andyfmx

If I recall correctly, the E wagon kits used two GY underframes and some strip styrene to build the underfloor:
http://steameramodels.com/documents/E%20Bogie%20Open%20Wagon.pdf
  andyfmx Locomotive Fireman

Nah the three I've built so far contained one piece chassis plus other brass etched details needed to complete the wagon.
  allan Chief Commissioner

Nah the three I've built so far contained one piece chassis plus other brass etched details needed to complete the wagon.
andyfmx
http://steameramodels.com/documents/E%20Bogie%20Open%20Wagon.pdf
  andyfmx Locomotive Fireman

allan that link has already been posted.


I need the actual complete kit, not just a link to the instructions because the kit contains brake details, bogies, etched details and decals necessary to complete the kit.
  TheMeddlingMonk Deputy Commissioner

Location: The Time Vortex near Melbourne, Australia
allan that link has already been posted.


I need the actual complete kit, not just a link to the instructions because the kit contains brake details, bogies, etched details and decals necessary to complete the kit.

andyfmx
I thought you were just after the underfloor, hence why I posted the link. The GY underframes can be purchased separately from Steam Era Models, so if you're really stuck, you can make one that way. Many of the detail parts can also be purchased from SEM. Bill's Billboards may have the decals you are after.
  allan Chief Commissioner

As far as I am aware the SEM kit has only ever used GY floors to build the E wagon floors, as per the linked instructions. My suspicion is that an E wagon underframe kit was "spun off" from the VR Products TW tank kit - they also did an S wagon kit and an S wagon is, after all, an E wagon bereft of its sides.
  VR_King Junior Train Controller

BRASS!

In particular a PSM or Trainbuilder A2 in Canadian Red/brown!

Also interested in any other brass items anyone has

Thanks.
  Shazam75 Chief Commissioner

Wanted:

Steam Era Models E wagon kit, or the chassis/underfloor from the kit.

Please PM.
andyfmx
Hi Andy
I have a SEM E Wagon kit - i sent you an PM.

Regards
Shelton
  andyfmx Locomotive Fireman

Anyone have a spare Auscision Victorian Railways BB van available?
  Salevr Beginner

WANTED:
STILL LOOKING FOR  WEICO 102 OR 153 WALKER RAILMOTOR PREFERABLY KIT OR FULLY ASSEMBLED ONE.
OR ANY OTHER ONE CAR RAILMOTOR BUT NOT BRASS AS I CAN'T AFFORD IT.
MANY THANKS IN ANTICIPATION FOR YOUR PM.
ROB W
  comtrain Chief Commissioner

Location: Near Albury Wodonga
WANTED:
WEICO 102 OR 153 WALKER RAILMOTOR KIT OR FULLY ASSEMBLED ONE.
OR ANY OTHER ONE CAR WALKER RAILMOTOR.
MANY THANKS IN ANTICIPATION FOR YOUR PM.
ROB W
Salevr
Pm me? I have an unused one bought assembled RTR from Buffer Stop a few years back Blue with Yellow roof. You are welcome to it, if you would like to make a fair offer. ( I bought a Trainbuilder one, forgetting this one was stored away)
Cheers
Rod
  VR_King Junior Train Controller

BRASS!

In particular a PSM or Trainbuilder A2 in Canadian Red/brown!

Also interested in any other brass items anyone has

Thanks
  flathog Chief Commissioner

Location: Central West, NSW
Looking for;

CEY001 Auscision Models
Any Pacific National Mk4 48 class from Auscision Models
Any Pacific National 82 class from OTM
  Shazam75 Chief Commissioner

Hi Guys

Any one have a couple of spare Square Worm Bearings as I lost one and need one for one of my locomotives.

They look like this:

https://tinyurl.com/y7klaaep

Regards
Shelton
  Railfanman Station Master

Location: Banned
WTB OR SWAPMy as new Auscision Railmotor Walker 280 hp is too big for my layout.
Am willing to swap it for Walker 102hp or 153hp or buy one without trailer.
Robert
Salevr
Maybe you might be interested in my ajin brass 153 hp rail motor with trailer. Make me a reasonable offer if interested.
  Salevr Beginner

I have a small shunting layout and am looking for a single car Walker 102 or 153 rail motor, kit preferably or cheaper assembled one as I have spent too much on steam locos. Many thanks in anticipation. Robert.
  Railfanman Station Master

Location: Banned
Wanting to buy an Auscision or Powerline 3rd series T class in V/line livery.

Sponsored advertisement

Display from: