Railpage

 

 
    • 1213Driver posted
    Posted in Model Railways - General Discussions » WAGR Sn3.5 3D-printed Models

    While these models are clearly not RTR, they require considerably less work to complete than a typical kit, albeit at greater cost.
    Marbelup

    Here is an example of the SXT from the Marbelup Models range - Add Brass wire, Bogies, Paint, Decals and couplers and you have a wagon to the value of about $195 completed. I cant justify/afford too many of these but you couldn't easily build it from scratch so it is worth spending a bit extra to have one. A well designed and thought out 3D print!

    Edit history

    Edited 29 May 2014 22:51, 7 years ago, edited by 1213Driver

    While these models are clearly not RTR, they require considerably less work to complete than a typical kit, albeit at greater cost.
    Marbelup

    Here is an example of the SXT from the Marbelup Models range - Add Brass wire, Bogies, Paint, Decals and couplers and you have a wagon to the value of about $195 completed. Cant afford too many of these but you couldn't easily build it from scratch so it is worth spending a bit extra to have one. A well designed and thought out 3D print!

    Edited 29 May 2014 22:50, 7 years ago, edited by 1213Driver

    While these models are clearly not RTR, they require considerably less work to complete than a typical kit, albeit at greater cost.
    Marbelup

    Here is an example of the SXT - Add Brass wire, Bogies, Paint, Decals and couplers and you have a wagon to the value of about $195 completed. Cant afford too many of these but you couldn't easily build it from scratch so it is worth spending a bit extra to have one. A well designed and thought out 3D print!