Hitachi's UK plant looks to the world market
Sliding seats could enable passenger trains to carry goods
A1 No 60163 Tornado does 100mph
Rail Alliance drives Midlands Engine
GB Railfreight to implement Ideagen safety software
UAV survey company Bridgeway Aerial takes off
Fire at Euston Station causes nationwide rail disruption
DB Cargo UK confirms job cuts and reform
Subsea cable fault detection demonstrated to rail industry
HS2 rolling stock procurement moves forward
Nationwide we have 40,000 structures to be maintained. Across Network Rail, structures examiners are the eyes on the ground for asset engineers, inspecting bridges and other structures to ensure they are fit for purpose.
Structures examiner Tom Wilkinson (pictured below) is one of 56 people who routinely inspects Network Rail’s 7,000 bridges on the London North Western (LNW) route.
Many are well over 100 years old but are kept perfectly fit for purpose thanks to a proactive examination schedule. We identify new defects as they come about, keep an accurate track on them and nip potential problems in the bud.
A lot goes on behind the scenes: booking possessions, arranging machinery, closing roads, contacting landowners, organising specialist contractors. We like to think that if we’re doing our job well, no one notices.
Tom Wilkinson, Network Rail structures examiner for LNW
Examiners are writing condition reports on all structures in their patch at least once a year. Most are based on ‘visual’ exams – a check-up for tracked defects and any new areas of concern from ground level.
There are also ‘detailed’ – or ‘tactile’ – surveys, where every structural element is examined, photographed and its condition recorded. The frequency is risk-based and ranges from annually to every 12 years, depending on past reports.
Some structures need more frequent additional exams, for instance to monitor non-critical defects such as leaning walls, widespread fracturing of brickwork, or significant movement of structural elements under load – until they are repaired.
Access is often challenging. Ladders, mobile elevating work platforms, road rail vehicles and scaffolding are widely used but complex structures may require specialist solutions – roped access, underwater teams, CCTV or confined-spaces equipment.
Alongside the report, examiners also compile a Bridge Condition Measuring Index (BCMI) report which gives each structure a unique measurable score. They’ll look at ‘hidden critical elements’ which are structurally significant but not readily accessible, such as girders built into brickwork or buried in ballast.
The score highlights the need for repair, and engineers will log all significant defects in a live tracker and make recommendations for improvements.
As repairs are carried out over time, these defects are closed in the index, increasing its overall score.
It’s a real measure of safety improvement on our infrastructure.
There are always some surprises with the railway being such a unique workplace. If we identify an area of immediate concern with the potential to compromise public safety we’ll raise a Preliminary Advice Notice (PAN) there and then and in some cases close the railway until it’s done. This alerts the asset management team to arrange swift repairs.
We also respond to bridge strikes, which can vary from minor damage to extremely severe, lifting decks and tearing steel.
Below and top: Sankey viaduct
Track, signalling, points, electrification (overhead lines and signalling power), telecoms, stations and civils (viaducts, bridges and embankments) are all assets on the network that can fail and cause delays to services.
Delays explained: signals and points failure
While it’s important to renew parts of the network, the most significant influence on reliability is how existing assets are enabled to perform better. This is done through front-line maintenance teams, suported by planners and engineers.
This has been at the heart of our strategy for many years, and includes:
Control Period 6
We’ve set up the Intelligent Infrastructure programme to further improve the management of assets for delivery over the next six years, through to the end of Control Period six (CP6) in 2024.
The programme focuses on reducing expenditure while improving the availability of the infrastructure by:
Find out more
Our asset management strategy and policy
Bridges, tunnels and viaducts on the railway
Check it, don’t chance it: bridge strikes
Drones trialled for the inspection of large railway structures
Geo-RINM Viewer technology gives engineers a clearer picture of the railway
The post How structural inspections improve asset management appeared first on Network Rail.
This article first appeared on www.networkrail.co.uk
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2019 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.