Lund – Malmö quadruple tracking contract
Prime Minister inaugurates Napoli Afragola station
ÖBB starts Pyhrnstrecke station upgrading
Weekly LCL service widens appeal of China-Europe rail route
Siemens to buy planning software company HaCon
Hupac orders eight multisystem locomotives
Montecargo privatisation cancelled
IONX and Ermewa agree telematics partnership
High-value chemicals travel from China to Europe by rail
DB Regio selected for Rhein-Neckar operating contract
The reactor vessel for the first power-generating unit was delivered to the construction site of the Belarusian nuclear power plant on 24 December. Its installation will begin in 2016, BelTA has learned.
The reactor vessel was made by the Volgodonsk-based branch Atommash of the Russian company AEM Technologies. This piece of equipment weighs over 330 tonnes. It is 13 meters high, with the diameter as large as 4.5 meters. The reactor is a vertical cylinder with an elliptical bottom. The reactor core and the internal components will be located inside.
The manufacturer sent the product on its way on 14 October. Combined means of transportation were used to deliver the piece of equipment to the nuclear power plant. Heavy trucks transported it from the manufacturer to the Tsimlyansk water reservoir first. From there the vessel was shipped by river to Veliky Novgorod. A specialized transporter was then utilized to deliver the reactor vessel by rail to the construction site.
The manufacturing of the reactor vessel for the second power-generating unit continues. It is expected to arrive in Belarus in 2017. On the whole, AEM Technologies will make over 50 kinds of equipment for the Belarusian nuclear power plant. A total of over 4,000 tonnes of equipment will be made and shipped in 2013-2017.
The Belarusian nuclear power plant is a project to build an AES-2006 type nuclear power plant 18km away from Ostrovets, Grodno Oblast. The Belarusian nuclear power plant will have two power-generating units with the total output capacity of up to 2,400MW (2×1,200MW). In line with the general contract for building the nuclear power plant the first power-generating unit is scheduled for commissioning in 2018, with the second one to go online in 2020.
The YouTube channel for Белорусская АЭС features a video of the reactor vessel being moved by rail:
Mikhail Krivyy also has a photo essay covering the transfer on his website:
The main object of transportation was the VVER-1200 nuclear reactor, manufactured at the Atommash plant in Volgodonsk. Its weight is about 340 tons with a volume of 348 m³. The reactor body resembles a cylinder and has a displaced center of gravity.
Cargoes of this volume are almost impossible to transport on ordinary roads. A large weight and volume requires the reinforcement of the pavement along the entire route. Even subterranean engineering communications and power lines that are inconspicuous to a simple sight cause problems. And bridges and overpasses are often an insurmountable obstacle for such cargo.
It’s easier when transporting by rail. But even here it is necessary to prepare the infrastructure and adjust the train schedule. On the way, traffic lights, signs, contact network supports and other infrastructure elements can be temporarily dismantled. The schedule changes not only for passing trains, but also oncoming ones.
The easiest way is to transport such goods on water. Even on a small barge, the reactor core does not look bulky.
As a result, it was decided to transport the reactor vessel through Veliky Novgorod. From Volgodonsk to the Volga along the Volga-Don canal. Further upstream, to the Rybinsk Reservoir. Then along the Volga-Baltic waterway to the Ladoga Lake. From there, along the Volkhov River to Veliky Novgorod.
At the plant, the reactor core was loaded onto a Cometto self-propelled modular transporter. In turn, the conveyor along with the reactor were loaded onto a barge. From Veliky Novgorod to the construction site of the Belarusian NPP the reactor was transported along lightly trafficked single-track non-electrified lines.
The railway wagon used to move the reactor is known as Schnabel car – this particular example had 32 axles with a carrying capacity of 500 tonnes – type ТСЧ-500М, model 14-Т001.
This article first appeared on www.eurogunzel.com
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2018 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.