GML 10's where abouts?

 
  greasyrhys Chief Commissioner

Location: MacDonald Park, SA
Heard GML10 (along with 8030) has returned to SA.

Sponsored advertisement

  greasyrhys Chief Commissioner

Location: MacDonald Park, SA
Only to head back to Gheringhap today, not sure why it had a brief stay in SA?
  bevans Site Admin

Location: Melbourne, Australia
Only to head back to Gheringhap today, not sure why it had a brief stay in SA?
greasyrhys

8030 and GML10 have departed Gheringhap this morning. The train is loaded and heading west.



Regards
Brian
  greasyrhys Chief Commissioner

Location: MacDonald Park, SA
Back to SA?

Thanks.
  phower Chief Commissioner

Location: Over on Kangaroo Island Sth Aust
Back to SA?

Thanks.
greasyrhys
well at least its working "again"..... good to see .... but I have asked before why can it not lead like on the Horsham  service  always trailing ...yes I know its on the main line now , but not at speed ???????????
  bevans Site Admin

Location: Melbourne, Australia
GMl10 did lead from South Australia to Gheringhap

Seen here through Stawell on the 19th



http://www.railpage.com.au/railcams/stawell/photo/9542965747

The loco arrived into Gheringhap at 22:17 that evening.

http://www.railpage.com.au/railcams/mobile/photo/9546927534

Regards
Brian
  phower Chief Commissioner

Location: Over on Kangaroo Island Sth Aust
OK I believe I did not spell it out correctly , sorry for the confusion , Nearly every time out goes out it trails  as it did with the Horsham  service .... when it cam down from Pt Augusta  it trailed I am informed .... but this could be wrong ... seems strange a loco like this woes not work on its own much or as stated leads a train >>> it must have some sort of  reason ....uncomfortable seats perhaps ?
  Barrington Womble Photo Nazi

Location: Banned
It's back at Gheringhap again.
  bevans Site Admin

Location: Melbourne, Australia
It's back at Gheringhap again.
Barrington Womble

yep completely blocking our view. i suspect it will be moved to the siding?

http://www.railpage.com.au/railcams/mobile/photo/9613332800
  Barrington Womble Photo Nazi

Location: Banned
You might have to re-locate the camera if this is an on-going issue.
It's in the siding, isn't it?
  speedemon08 Mary

Location: I think by now you should have figured it out
OK I believe I did not spell it out correctly , sorry for the confusion , Nearly every time out goes out it trails  as it did with the Horsham  service .... when it cam down from Pt Augusta  it trailed I am informed .... but this could be wrong ... seems strange a loco like this woes not work on its own much or as stated leads a train >>> it must have some sort of  reason ....uncomfortable seats perhaps ?
phower
Those Issues for leading got fixed when in SA. It's fine to lead now.
  bevans Site Admin

Location: Melbourne, Australia
GML10 has left Gheringhap as of this morning.
  alcoworldseries Deputy Commissioner

Location: Auburn
Ballasting closer to Newport today
  Junior Rodgie Dodgie
  Wallip Chief Commissioner

Location: Perth
Working in Kalgoorlie this week, and was nicely surprised to see 42202, 8030 & GML10 sitting at Parkenson with a loaded Ballast train.

Guessing this is its first visit to WA since leaving Port Headland?
  wn514 Chief Commissioner

Location: at a skyhooks concert living in the 70's
Working in Kalgoorlie this week, and was nicely surprised to see 42202, 8030 & GML10 sitting at Parkenson with a loaded Ballast train.

Guessing this is its first visit to WA since leaving Port Headland?
Wallip

*parkeston*
  Raichase Captain Rant!

Location: Sydney, NSW
Working in Kalgoorlie this week, and was nicely surprised to see 42202, 8030 & GML10 sitting at Parkenson with a loaded Ballast train.

Guessing this is its first visit to WA since leaving Port Headland?
Wallip

Your 422 should be 44202 in Qube livery. 42202 is in Interail livery and in Sydney at the moment.
  JimYarin Chief Commissioner

Location: Adelaide, South Australia
gml10 was recently coupled to c501 in melbourne. the database locally at rp has the locomotive under overhaul. is this still the case or is the locomotive back in revenue traffic?

http://www.railpage.com.au/railcams/bunbury-street/photo/12984563594
  greasyrhys Chief Commissioner

Location: MacDonald Park, SA
GML10 was reported on ballasting duties between Peterborough-Broken Hill last week.
  x31 Chief Commissioner

Location: gallifrey
GML 10 has been repaired and ran a grain from Somerton to Western Victoria Overnight. Image taken through Albion.

https://www.railpage.com.au/railcams/albion/photo/17971785288

GML10 lead RL302 and Rl305 also captured via Gheringhap and Stawell cameras.
  x31 Chief Commissioner

Location: gallifrey
returned to Melbourne today

https://dev.railpage.com.au/railcams/bunbury-street/photo/17592802954
  JimYarin Chief Commissioner

Location: Adelaide, South Australia
gml10 went past albion today on the down with the two rl units on an empty grain from appleton dock. https://www.railpage.com.au/railcams/albion/photo/18284718051
  NSWGR8022 Chief Train Controller

Location: From the lands of Journalism and Free Speech
gml10 went past albion today on the down with the two rl units on an empty grain from appleton dock. https://www.railpage.com.au/railcams/albion/photo/18284718051
JimYarin

Returned to Melbourne a short time afterwards.
  bingley hall Minister for Railways

Location: Last train to Skaville
GML10 and RL302 loading grain at Nhill as I type

Sponsored advertisement

Display from:   

Quick Reply

We've disabled Quick Reply for this thread as it was last updated more than six months ago.