NEW ROUTE: Pakenham to Flinders Street via Loop

 
  Xcrappa Station Staff

Hello Railpage,
I am going to make a new route. The route is Pakenham to Flinders Street via City Loop Razz
I just need to find the following for the route:
1. Flinders Street Station Building
2. Southern Cross Station Building.
3. Station bulidings and platform.
4. signals
5. Track
6. If Posssible Loop stations
Thanks Will

Sponsored advertisement

  railblogger Chief Commissioner

Location: At the back of the train, quitely doing exactly what you'd expect.
Hello Railpage,
I am going to make a new route. The route is Pakenham to Flinders Street via City Loop Razz
I just need to find the following for the route:
1. Flinders Street Station Building
2. Southern Cross Station Building.
3. Station bulidings and platform.
4. signals
5. Track
6. If Posssible Loop stations
Thanks Will
Xcrappa

For the track, you could probably use the default or the UK Finescale track. You might need to create your own model for Southern Cross. As for the others (including the loop stations), I believe Melbournesparks is allowing the objects in the Epping route to be used?
  cityrail-rulez Chief Train Controller

Hello Railpage,
I am going to make a new route. The route is Pakenham to Flinders Street via City Loop Razz
I just need to find the following for the route:
1. Flinders Street Station Building
2. Southern Cross Station Building.
3. Station bulidings and platform.
4. signals
5. Track
6. If Posssible Loop stations
Thanks Will
Xcrappa

If you can get a hold of Russell Beer, he may allow you to use his Southern Cross & Flinders Street buildings
these models are in the North-Eastern (Melbourne - Seymour) route
  X'Trapolis-904M Deputy Commissioner

Location: Melbourne
For the track, you could probably use the default or the UK Finescale track. You might need to create your own model for Southern Cross. As for the others (including the loop stations), I believe Melbournesparks is allowing the objects in the Epping route to be used?
railblogger

from what i am seeing MS Is allowing people to use his buildings
  Xcrappa Station Staff

Well I reckon Ill use Default tracks and see if Melbourne Sparks  could let me use his Signals and stuff. I will also see if I can use platforms and buildings.  Does anyone know Russell Beer's email??
  Melbournesparks Chief Commissioner

Location: City of Eltham
You'd be welcome to use objects I created for the Epping line. Part of the reason for working on this route was to hopefully contribute to the MSTS community and allow future projects to benifit from it, just like the Epping line benifited from other people's projects before it.

Note most of the signals are not mine, they were largely made by Russell Beer for the north east mainline route.

I can only speak my own objects, you'd have to contact other authors individually.
  cityrail-rulez Chief Train Controller

Does anyone know Russell Beer's email??
Xcrappa

I know Russell can be found on the forums at http://mstsforumsforaustralia.freeforums.org/index.php
His username is Mrdriver, not sure if Russ is still available here on Railpage?

Or you can download Russell's routes/models to obtain his email address, found within the readme file

I hope this information is useful Smile
Remember that Russell can be busy with things outside MSTS and may or may not respond to your PM or email
  Xcrappa Station Staff

Readme time. But I'll have to wait until the Epping line is released so I can get The loop buildings and stuff
  Xcrappa Station Staff

I just realised the epping route has been released. Now how would i extract the city loop stations into my new route
  railblogger Chief Commissioner

Location: At the back of the train, quitely doing exactly what you'd expect.
I just realised the epping route has been released. Now how would i extract the city loop stations into my new route
Xcrappa

Your best bet would be to find the shapes used for the stations and copy them into your route.
  superheatedsteam Deputy Commissioner

Location: Perth, WA
Even more readme time.

I would suggest you read the route building guide available from http://www.trainsim.com download library. The file is called msts-rbg.zip.

Also read the route building tutorials at http://msts.steam4me.net/tutorials/index.html

Sponsored advertisement

Subscribers: Melbournesparks

Display from:   

Quick Reply

We've disabled Quick Reply for this thread as it was last updated more than six months ago.