Forums

 
1 of 9 2 3 4 5 6 7 8 9

Search found 203 matches

Captain Underpants

Member since Mar 10, 2012

Last visited Thursday, 27 September, 2018

  View profile

[quote=4206][b][color=#333333][size=5][font=Arial, sans-serif]New HO Scale Locomotive to be announced at this weekends Sydney Model Railway Exhibition. [/font][/size][/color][/b][color=#333333][/color ...

[quote=a6et][quote][quote]So who's bought one?

For us more distant prospective buyers, how does it rate - is at an SR 10 or an Austrains 36?[/quote]Neither of those models, best compared to the Ixi ...

Any recommendations for Australian sounds for these...or perhaps just a generic TCS WOW Steam decoderz/
Gremlin


Try DCC Solutions, both models listed for sound with info on their insta ...

So who's bought one?

For us more distant prospective buyers, how does it rate - is at an SR 10 or an Austrains 36?

gw0071

Neither of those models, best compared to the Ixion 32 Class  ...

[quote=comtrain][quote][b]THANKS to all[/b] for all your replies/concerns...!

I have it [b][u]ALL working OK[/u][/b].

NCE > NCE/USB interface > Laptop (windows 10) > JMRI

and Loving it... ! C ...

[quote=dthead][quote]I think this is pretty much answered above, but I use JMRI without a 9-pin UART ('comms port' per the OP).

I use a PR3 (Digitrax) and connect the USB to a laptop running Windo ...

[quote=dthead]Again he has JMRI installed and working on the existing computer. Your info will help others though.

These days even usb ports are dropped off "hip" computers. They might have a min ...

[quote=dthead]

No computer spec searching is needed. Any computer with a USB port will work.

I explained how to do it in an earlier post.

Cheers

Captain U

Have another read of the first po ...

[quote=SB55]Hi guys,

I'm moving along nicely with my dcc powercab setup.

Ive downloaded and installed JMRI ON my desktop computer windows 10 and after a few dramas managed to get it running o ...

[quote=dthead][quote]Well ... thats my question really... , [/quote]

What computer make/model / supplier are you looking at..... As we all have said we need "something" to convert to USB so i ...

The connection from the NCE PowerCab to notebook, laptop or any computer for that matter is very simple using a USB port not Serial/Com ports.

You need:

NCE PowerCab DCC Starter System

NCE USB  ...

Speaking to Mark from DCC Solutions recently and he told me that back in April he collapsed while at work (not working on DCC, he has another full time job). Following that incident he battled a serie ...

[quote=NSWGRules]Auscision V-Set - Another wonderful model from Auscision yet again. Thank you Auscision! I am lucky to have pre-ordered the sold out U21 Blue Goose model.

Has anyone fitted or ...

[quote=Booly]Captain U , your suspicions with the Ebay gears being too wide are correct . I purchased a set , fitted them (which we all know is a prick of a job !) and set the back to back , ran beaut ...

[quote=Roachie]Okay...here we go.

The black plastic bit that holds the axle set together is called a "muff".

The muffs were made at the factory, apparently, by using "plastic" (it's not just pla ...

[quote=FirstStopCentral]Gary at Blacktown is apparently working on a custom sound file for the LokSound 4.0.

Also DCC Solutions have a page up saying they are doing one but has not been updated.


...

[quote=Blackaddar]Hi Captain,

Will do, Ive not pulled one of these apart before, does the model have any "gotcha's!" i should be weary of before i attempt to dismantle it?

I'm kinda of disappoin ...

[quote=Blackaddar]Hey everyone,

Been a while, but I'm still hanging around Smile.

I was doing some maintenance on my layout last night and after a good track cleaning I decided to let my loco's str ...

Paul

You shouldn't be giving away manufacturers secrets like that.

But you are correct both are coming

Captain U

[quote=5711]Whats the general consensus on the Traino' 48 anyway?

From what I have seen so far its pretty nice - just interested what people might be thinking as a three way comparison between TrainO ...

[quote=David Peters]It is about time Mr Eassie provide some instructions on removing the bodies etc on all his locomotives as even if you don't want or have DCC you still need to take the body off to ...

[quote=gomer]Not usually a nitpicker but it's hard to miss one glaring error. Besides no cab detail the stripe along the side of the PN version is wrong. The blue comes down further than what they've ...

[quote=Victralian][color=#000000][size=3][font=Open Sans, Calibri, Arial, Helvetica, sans-serif]I started to put a decoder into my BL and discovered all 4 screws under the bogies are burred. This is t ...

[quote=defman]Yo.

Got my 2 A.N BL's and a V/Line G in the mail today. Gave them a good run at the club layout. They went pretty well, look alright too. Any other feedback from people?

My only minor ...

Here's one of my super detailed Lima 38s

I have done a few including fitting an Eureka loco body picked up in the bargain bin at an exhibition, onto a Lima chassis and fitting a smoke generator in  ...

1 of 9 2 3 4 5 6 7 8 9

Search found 203 matches

Jump to: