WUISKE MODELS - News & Updates

 
  WUISKE Assistant Commissioner

G'day All,
Chapter 73 of Adam's Corner has just been uploaded. This one is a special one.
As always, feel free to comment.
http://wuiskemodels.com/layout/73.htm
Cheers,
Adam

Sponsored advertisement

  appleby Deputy Commissioner

Location: South of the Tweed - In Canberra.
Well if that hasn't made my day indeed.

Like the look of the all the underframe detailing.
  dthead Site Admin

Location: Melbourne, Australia
G'day All,
Chapter 73 of Adam's Corner has just been uploaded. This one is a special one.
As always, feel free to comment.
http://wuiskemodels.com/layout/73.htm
Cheers,
Adam
"WUISKE"


WOW !  Good one Adam & Jade !

But I wish to be un-QLD like ( after all I were born in Newcastle NSW, and live in VIC) and ask can I replace the bogies with broad gauged ones if I desire ? The 12mm boogies will find a good home within my club so they would not be wasted.

Regards,
David Head
  andrewstrains Assistant Commissioner

Location: Townsville, Where else but QLD
Congratulations Adam and Jade in produceing the first RTR item for the Qld market. They look FANTASTIC!!!!

The first pack sold is coming my way, my order has been processed allready Smile

Andrew
  WUISKE Assistant Commissioner

G'day All,
Chapter 73 of Adam's Corner has just been uploaded. This one is a special one.
As always, feel free to comment.
http://wuiskemodels.com/layout/73.htm
Cheers,
Adam
"WUISKE"


WOW ! Good one Adam & Jade !

But I wish to be un-QLD like ( after all I were born in Newcastle NSW, and live in VIC) and ask can I replace the bogies with broad gauged ones if I desire ? The 12mm boogies will find a good home within my club so they would not be wasted.

Regards,
David Head
"dthead"


G'day David,
The wagons will be released soon in a standard gauge version as well. If you do not wish to wait though, the wagons have been designed to accept the following bogies...
ARKits, Auscision, Bachmann, Walthers, Life Like, Model Power, Kadee and the list goes on. Essentially we have made ALL fittings on these models as standard as possible. The  bogies are fitted to the wagon bolsters with a pin fitted inside a sleeve, you just pop the pin out and put whatever bogie you want under them. 

Cheers,
Adam
  wrongroad Deputy Commissioner

Location: Grafton
Well done Adam, I hope they really go well for you. Almost (I said almost) makes me want to run QLD gear.
People like your good self, who have a go, deserve to have plenty of success.
Regards and respect.
  Jade Wuiske Train Controller

Location: Queensland
Thank you very much, wrongroad... It's comments such as these that keep pushing us to do more and more.
Genuinely and sincerely, thanks from that mental Wuiske mob. 
  QR-INTERAIL Deputy Commissioner

Location: Where else, but Queensland
Wholly $hit, this is absolutely awesome, we are really really getting spoilt now.

The future is looking strong for the QR Modeller. 

Well done Adam and Jade, look forward to supporting you with some purchases in the very near future.

Great work, can't wait to see them in person.


  SpudLight Beginner

Congratulations Adam and Jade in produceing the first RTR item for the Qld market.
"andrewstrains"


Well except that there have been RTR QLD models available for some time, so not really the first.  PGC Scalemodels have had made-to-order RTR rollingstock for a lot of their products (including a QLX) for some time and their steam locos are only available as RTR, and Black Diamond Models have produced their diesels as RTR for years!
  mrferric Station Master

Congratulations Adam and Jade in produceing the first RTR item for the Qld market.
"andrewstrains"
Well except that there have been RTR QLD models available for some time, so not really the first. PGC Scalemodels have had made-to-order RTR rollingstock for a lot of their products (including a QLX) for some time and their steam locos are only available as RTR, and Black Diamond Models have produced their diesels as RTR for years!
"SpudLight"


Maybe he should have said "first RTR model made in China (sic) for QLD modellers!"
  Jade Wuiske Train Controller

Location: Queensland
Congratulations Adam and Jade in produceing the first RTR item for the Qld market.
"andrewstrains"
Well except that there have been RTR QLD models available for some time, so not really the first. PGC Scalemodels have had made-to-order RTR rollingstock for a lot of their products (including a QLX) for some time and their steam locos are only available as RTR, and Black Diamond Models have produced their diesels as RTR for years!
"SpudLight"


Yes, (name censored by request), and welcome to Railpage by the way, you are right that Andrew should have been slightly clearer in what he said. In fact, Wuiske Models has also had various RTR items available in the past in limited quantities. I believe what Andrew meant was that these are the first to be released Mass Produced, Ready to Run models for the Queensland Market.
  andrewstrains Assistant Commissioner

Location: Townsville, Where else but QLD
I'll rephrase my comment,

These are the first RTR mass produced QR model.

While I do appriciate and own some Black Diamond stuff it is RTR but essentionally kits built to order.

Andrew
  SA_trains Deputy Commissioner

Location: ACT
WOW! Congratulations! This is a very significant event for the Model Rail industry in Queensland as well as Australia in general. Shows the depth and strength of the hobby across the land. Well done to those concerned! 
  QR-INTERAIL Deputy Commissioner

Location: Where else, but Queensland
By the way, meant to say before, very clever re the decal set for the wagon numbers too. Surprise the "broad gauge" suppliers don't do that more often. 

Again well done. 



  Hendo Deputy Commissioner

Superb Effort, Adam,Jade and Haskell Co. In some ways such a pity I am with N Scale!

All the best with this effort.


Cheers,
Hendo
  Teditor Deputy Commissioner

Location: Toowoomba
Adam/Jade,

Congratulations on this product, your enthusiasm and devotion to the QR market is a solid foundation to it's success, you really came up with a surprise groundbreaking occurrence with this one.
  qredge Deputy Commissioner

Location: Marsden Qld
Wow-what can one say
Fantastic, impressive etc. cannot spell all those other applicable adjectives that describe this event

A Qld company gave the first injection molded kit to the Aussie market which incidentally a Louvred van as well and now a Qld co gives us RTR Qld model as well

Who says there was no Santa Clause?

Santa Adam-the mind boggles!!
  ARKits Train Controller

Location: Warwick, Qld
Hi Adam and Jade and Haskell Co,

I do hope the modellers out there appreciate the lengths you have gone to and just how far the neck is stretched and support you to the hilt. I know I spoke to you privately but you have done it and I hope it all goes well.

Regards

Al
  WUISKE Assistant Commissioner

G'day All,
Jade, Haskell Co and I would like to thank you all for your very kind words.
We are all very proud of the results from the work we have put into our QLX wagons. We are similarly proud of our next few models that will be released at the Ipswich Show on the 27th & 28th.

It is only as a result of the support we have recieved over the years that items such as these can be made possible and we all appreciate it more than can be expressed.

With any luck, the trend will continue and between Wuiske Models, Haskell Co, Southern Rail, BDM and PGC this will be the start of a golden age for QR Modelling.

Innitial sales would appear to suggest that over the last ten years, we had only just scratched the surfae of those wishing to model QR.

Over the last few days, our website has been getting hammered with visitors. We are currently averaging more than 1100 individual visitors per day! This is over twice the number of visitors to our site usually. On a more entertaining note, We have recieved over 30 emails from people trying to guess what the next models to be released in a fortnight are. In response to these, I will simply say that it is NOT a QLX Laughing

Having said that, some of the guesses have been rather interesting and mildly entertaining, please feel free to post your guesses here though as it is fasinating to hear some of the reasons behind peoples thoughts.

Once again, we would all like to thank you for your continued support and to say that 2013 is shaping up to be an AMAZING year!

Cheers,
Adam
  QR-INTERAIL Deputy Commissioner

Location: Where else, but Queensland
Well I'm going to lock in the tautliners for the next release, that's my guess. 

With the forthcoming orders for the QLX, plus SR/PGC/BDM and no doubt some more after the Ipswich show, I can see I am really going to get in trouble with the OIC Homefront! Rolling Eyes

Nevermind, as I've said before, good times ahead for the QR Modeller. Hopefully all suppliers get supported, which result in more models for us. 
  Jade Wuiske Train Controller

Location: Queensland

I would just like to say that I am in absolute accord with every word of Adam's above post.

The only thing that I'd like to add is that there is a Wuiske Models coffee mug for anyone who guesses what our next Ready to Run models are.

Happy guessing!

  GT46C-ACe Deputy Commissioner

Location: Gold Coast QLD
2800 class? No that'd be a bit much....
  andrewstrains Assistant Commissioner

Location: Townsville, Where else but QLD
I would just like to say that I am in absolute accord with every word of Adam's above post.

The only thing that I'd like to add is that there is a Wuiske Models coffee mug for anyone who guesses what our next Ready to Run models are.

Happy guessing!
"Jade Wuiske"


But Ive already got a Wuiskie coffee mug, and I dont drink coffee!

Andrew
  Jade Wuiske Train Controller

Location: Queensland
Andrew, then use one for your milo and one for your vegemite with hot water Razz
  Teditor Deputy Commissioner

Location: Toowoomba

I would just like to say that I am in absolute accord with every word of Adam's above post.

The only thing that I'd like to add is that there is a Wuiske Models coffee mug for anyone who guesses what our next Ready to Run models are.

Happy guessing!

"Jade Wuiske"


Jade,

Will that include endless cups of coffee?

Sponsored advertisement

Display from:   

Quick Reply

We've disabled Quick Reply for this thread as it was last updated more than six months ago.